Hayward pool pumps are renowned for their superior quality and high-end features. One notable feature that is synonymous with these pumps is the timer. As the name implies, the function of the timer is to turn on the pump at specific times of the day, saving on energy expenses. It consists of a configuration menu and a clock that you have to adjust to determine when the pump operates.
Interestingly, Hayward pool pump timers may be as simple as a manual clock or as intricate as an automatic electronic device. Nevertheless, no matter the style, they all perform the same function.
Here are key steps on how to set a timer on a Hayward pool pump
STEP 1: Unlock configuration menu
Press the < and > buttons simultaneously for a few seconds to unlock the configuration menu
STEP 2: Change clock setting
The timer comes with a default clock setting that is usually incorrect. You have to change the clock setting by pressing the + or - button to select the appropriate time. You also have to adjust the hour, day, month and year using the same menu options.
STEP 3: Press the mode button to set the start time
After adjusting the clock settings, you have to press the “>” button or the mode button to enter the timer menu. Depending on the model, press the on/off button or the +/- button to set the time you want the timer to start.
STEP 4: Press the mode button to set shutoff time
Press the “>” button or the mode button once again to set the desired shutoff time just as you did in step 3
STEP 5: Press the mode button to save timer settings
Save timer settings by pressing the mode button again
STEP 6: Check timer and reconfigure if necessary
Confirm if the pump is operating as specified by the timer or reconfigure it correctly if necessary
For clock-style timers, the procedure is simpler and straightforward. You only need to:
STEP 1: Locate the clock dial
Start by locating the clock dial in the timer box next to the pump
STEP 2: Set the clock dial to the appropriate time of day
Pull the clock dial outward and turn it clockwise or counterclockwise to set the appropriate time.
STEP 3: Adjust the “on” tripper to the desired time on the dial
Move the on tripper (normally green or silver in color) to the time you want the timer to start
STEP 4: Connect the “off” tripper to the desired time on the clock dial
Move the off tripper (red in color) to the time you want the timer to shut off the pump
Here’s the point:
Learning how to set the timer on the Hayward pool pump or any other pump can go a long way to cut down on your energy bills. However, the time set has to be appropriate for you to enjoy lower rates. Essentially, you can set the pump to run during off-peak hours when electricity costs are lower or during cold seasons when most people are not using the pool. This will guarantee that you do not incur high operational costs while ensuring that the pool or spa remains safe and clean for swimming. Also, you can learn more cleaning pool pump tips.